This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

THS6132VFPR +BOM

Advanced -pin HLQFP EP T/R ADSL driver for precise communicati

2/0 Driver 32-HLQFP (7x7)

Low Total Power Consumption Increases ADSL Line Card Density (20 dBm on Line)
600 mW w/Active Termination (Full Bias)
530 mW w/Active Termination (Low Bias)
Low MTPR of –74 dBc (All Bias Conditions)
High Output Current of 500 mA (typ)
Wide Supply Voltage Range of ±5 V to ±15 V [VCC(H)] and ±3.3 V to ±15 V [VCC(L)]
Wide Output Voltage Swing of 43 Vpp Into 100- Differential Load [VCC(H) = ±12 V]
Multiple Bias Modes Allow Low Quiescent Power Consumption for Short Line Lengths
160-mW/ch Full Bias Mode
135-mW/ch Mid Bias Mode
110-mW/ch Low Bias Mode
75-mW/ch Terminate Only Mode
13-mW/ch Shutdown Mode
Low Noise for Increased Receiver Sensitivity
3.3 pA/Hz Noninverting Current Noise
9.5 pA/Hz Inverting Current Noise
3.5 nV/Hz Voltage Noise
APPLICATIONS
Ideal for Active Termination Full Rate ADSL DMT applications (20-dBm Line Power)

Product Category:	High Speed Operational Amplifiers	Number of Channels:	2 Channel
GBP - Gain Bandwidth Product:	-	SR - Slew Rate:	300 V/us
CMRR - Common Mode Rejection Ratio:	60 dB	Ib - Input Bias Current:	15 uA
Vos - Input Offset Voltage:	15 mV	Supply Voltage - Max:	+/- 16 V
Supply Voltage - Min:	+/- 3.3 V	Minimum Operating Temperature:	- 40 C
Maximum Operating Temperature:	+ 85 C	Mounting Style:	SMD/SMT
Packaging:	Cut Tape	3 dB Bandwidth:	80 MHz
Amplifier Type:	Current Feedback	en - Input Voltage Noise Density:	3.5 nV/sqrt Hz
Height:	1.4 mm	Length:	7 mm
Maximum Dual Supply Voltage:	+/- 16 V	Minimum Dual Supply Voltage:	+/- 3.3 V
Moisture Sensitive:	Yes	Operating Supply Voltage:	33 V
Pd - Power Dissipation:	3.57 W	Product:	Operational Amplifiers
Product Type:	Op Amps - High Speed Operational Amplifiers	PSRR - Power Supply Rejection Ratio:	70 dB
Factory Pack Quantity:	1	Subcategory:	Amplifier ICs
Supply Type:	Dual	Topology:	Current Feedback
Width:	7 mm	Unit Weight:	0.006300 oz