Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
FET input amplifiers provide high common-mode rejection ratio and low distortion
8-SOICManufacturer:
Texas Instruments
Mfr.Part #:
TL082ACDE4
Datasheet:
Mounting Style:
SMD/SMT
Number Of Channels:
2 Channel
Supply Voltage - Max:
30 V
GBP - Gain Bandwidth Product:
3 MHz
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on TL082ACDE4. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
With its dual-channel configuration, the TL082ACDE4 allows for flexibility in circuit design and operation. Whether used in audio amplification, sensor interfaces, or voltage followers, this op amp delivers consistent and stable performance. The JFET input stage ensures minimal noise interference and high input impedance, resulting in accurate signal processing and amplification
Product Category | Operational Amplifiers - Op Amps | Mounting Style | SMD/SMT |
Number of Channels | 2 Channel | Supply Voltage - Max | 30 V |
GBP - Gain Bandwidth Product | 3 MHz | Output Current per Channel | 10 mA |
SR - Slew Rate | 13 V/us | Vos - Input Offset Voltage | 6 mV |
Supply Voltage - Min | 7 V | Minimum Operating Temperature | 0 C |
Maximum Operating Temperature | + 70 C | Ib - Input Bias Current | 200 pA |
Operating Supply Current | 1.4 mA | Shutdown | No Shutdown |
CMRR - Common Mode Rejection Ratio | 86 dB | en - Input Voltage Noise Density | 18 nV/sqrt Hz |
Series | TL082A | Amplifier Type | General Purpose Amplifier |
Dual Supply Voltage | +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V | Height | 1.58 mm |
In - Input Noise Current Density | 0.01 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 4.9 mm | Maximum Dual Supply Voltage | +/- 18 V |
Minimum Dual Supply Voltage | +/- 3.5 V | Operating Supply Voltage | 7 V to 36 V, +/- 3.5 V to +/- 18 V |
Pd - Power Dissipation | 680 mW | Product | Operational Amplifiers |
Product Type | Op Amps - Operational Amplifiers | Factory Pack Quantity | 75 |
Subcategory | Amplifier ICs | Supply Type | Single, Dual |
Technology | BiFET | Vcm - Common Mode Voltage | Negative Rail + 4 V to Positive Rail - 4 V |
Voltage Gain dB | 106.02 dB | Width | 3.91 mm |
Unit Weight | 0.002561 oz |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.622 | $0.62 |
200+ | $0.241 | $48.20 |
500+ | $0.233 | $116.50 |
1000+ | $0.229 | $229.00 |
The prices below are for reference only.