Payment Method
UCC21530QDWKRQ1 +BOM
Dual-channel gate driver for automotive applications with 4A and 6A output current capabilities, featuring a 5
SOIC-14-
Manufacturer:
-
Mfr.Part #:
UCC21530QDWKRQ1
-
Datasheet:
-
Series:
Automotive, AEC-Q100
-
Programmable:
Not Verified
-
Driven Configuration:
Half-Bridge
-
Channel Type:
Independent
-
EDA/CAD Models:
Availability: 7295 PCS
Please fill in the short form below and we will provide you the quotation immediately.
UCC21530QDWKRQ1 General Description
The UCC21530QDWKRQ1 is a gate driver IC that provides a robust and reliable solution for controlling power semiconductor switches like MOSFETs and IGBTs. It is designed to enhance the efficiency and performance of power conversion systems.
The UCC21530-Q1 is an isolated dual-channel gate driver with 4-A source and 6-A sink peak current. It is designed to drive IGBTs, Si MOSFETs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion.
The input side is isolated from the two output drivers by a 5.7-kVRMS reinforced isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1850 V.
This driver can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). The EN pin pulled low shuts down both outputs simultaneously and allows for normal operation when left open or pulled high. As a fail-safe measure, primary-side logic failures force both outputs low.
The device accepts VDD supply voltages up to 25 V. A wide input VCCI range from 3 V to 18 V makes the driver suitable for interfacing with both analog and digital controllers. All the supply voltage pins have under voltage lock-out (UVLO) protection.
Key Features
- AEC-Q100 qualified with:
- Device temperature grade 1
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
- Functional Safety Quality-Managed
- Documentation available to aid functional safety system design
- Universal: dual low-side, dual high-side or half-bridge driver
- Wide body SOIC-14 (DWK) package
- 3.3-mm spacing between driver channels
- Switching parameters:
- 19-ns typical propagation delay
- 10-ns minimum pulse width
- 5-ns maximum delay matching
- 6-ns maximum pulse-width distortion
- Common-mode transient immunity (CMTI) greater than 100-V/ns
- Isolation barrier life >40 years
- 4-A peak source, 6-A peak sink output
- TTL and CMOS compatible inputs
- 3-V to 18-V input VCCI range
- Up to 25-V VDD output drive supply
- 8-V and 12-V VDD UVLO options
- Programmable overlap and dead time
- Rejects input pulses and noise transients shorter than 5 ns
- Operating temperature range –40 to +125°C
- Safety-related certifications:
- 8000-V
- PK
- 5.7-kV
- RMS
- CSA certification per IEC 60950-1, IEC 62368-1, IEC 61010-1 and IEC 60601-1 end equipment standards
- CQC certification per GB4943.1-2011
Application
- Automotive: It can be found in automotive power electronics systems, such as motor drives, traction inverters, and battery management systems.
- Industrial: In industrial drives, uninterruptible power supplies (UPS), and robotics for controlling high-power switches.
- Renewable Energy: Used in solar inverters, wind turbine systems, and power converters for efficient energy conversion.
- Motor Control: In motor control applications like electric vehicle drives and industrial motor drives.
- Power Electronics: It is a critical component in power electronic converters, including DC-DC converters and DC-AC inverters.
- Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV) Systems: In the power electronics systems of electric and hybrid vehicles for efficient energy management and motor control.
- Battery Management Systems: For managing the charging and discharging of batteries in various applications.
- Grid-Tied Inverters: In grid-tied solar inverters for converting DC power from solar panels to AC power for the grid.
Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)Gate Drivers | Series | Automotive, AEC-Q100 |
Programmable | Not Verified | Driven Configuration | Half-Bridge |
Channel Type | Independent | Number of Drivers | 2 |
Gate Type | IGBT, N-Channel, P-Channel MOSFET | Voltage - Supply | 3V ~ 18V |
Logic Voltage - VIL, VIH | 1.2V, 1.6V | Current - Peak Output (Source, Sink) | 4A, 6A |
Input Type | CMOS/TTL | Rise / Fall Time (Typ) | 6ns, 7ns |
Operating Temperature | -40°C ~ 130°C (TJ) | Mounting Type | Surface Mount |
Base Product Number | UCC21530 | Product Category | Galvanically Isolated Gate Drivers |
Type | Half-Bridge | Mounting Style | SMD/SMT |
Number of Outputs | 2 Output | Output Current | 6 A |
Supply Voltage - Min | 3 V | Supply Voltage - Max | 18 V |
Rise Time | 6 ns | Fall Time | 7 ns |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 125 C |
Qualification | AEC-Q100 | Logic Type | CMOS, TTL |
Moisture Sensitive | Yes | Operating Supply Current | 3 mA |
Output Voltage | 25 V | Pd - Power Dissipation | 1.81 W |
Product | Isolated Gate Drivers | Product Type | Galvanically Isolated Gate Drivers |
Propagation Delay - Max | 30 ns | Rds On - Drain-Source Resistance | 5 Ohms |
Factory Pack Quantity | 2000 | Subcategory | PMIC - Power Management ICs |
Unit Weight | 0.025013 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,295
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for UCC21530QDWKRQ1, guaranteed quotes back within 12hr.
****** Seller highly recommended. ****** Excellent product, good quality, works as intended, fast delivery, carefully and professionally packaged, thank You! Friendly regards and best wishes _ Jack