This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

JN5174/001Z +BOM

Wireless data transfer is accelerated using ZigBee and IEEE.standards for improved efficiency

Manufacturer:

NXP Semiconductor
Mfr.Part #:

JN5174/001Z
Datasheet:

JN5174/001Z Datasheet (PDF)
Series:

JN517X
Programmable:

Not Verified
Type:

TxRx + MCU
RF Family/Standard:

802.15.4

JN5174/001Z General Description

The JN5174 device is an ultra-low-power, high-performance wireless microcontroller, optimized as a platform for ZigBee 3.0 applications in Smart Home and Smart Lighting networks. It features an Arm? Cortex?-M3 processor with debug and programmable clock speeds. The JN5174 device has 160 kB of embedded Flash memory as well as 32 kB of RAM and 4 kB of EEPROM. The embedded Flash can support "Over-The-Air" firmware updates. The device also includes a 2.4 GHz "IEEE802.15.4 compliant" transceiver and a comprehensive mix of on-chip analog and digital peripherals.The radio transmit power is configurable up to +10 dBm output. The very-low receive operating current (down to 12.7 mA in normal operation and 0.6 μA in sleep mode) results in long battery life, allowing operation directly from a coin cell. Through its power-saving modes, the device is therefore ideal for battery-powered nodes. The on-chip peripherals include a fail-safe I2C-bus, SPI-bus ports (both leader and follower) and a 6-channel analog-to-digital converter, directly supporting a wide range of applications without the need for extra hardware.For support documentation, please click here.

Specifications

Category	RF and WirelessRF Transceiver ICs	Series	JN517X
Programmable	Not Verified	Type	TxRx + MCU
RF Family/Standard	802.15.4	Protocol	Zigbee®
Modulation	-	Frequency	2.4GHz ~ 2.485GHz
Data Rate (Max)	-	Power - Output	10dBm
Sensitivity	-96.5dBm	Memory Size	160kB Flash, 4kB EEPROM, 32kB RAM
Serial Interfaces	I²C, PWM, SPI, UART	GPIO	1
Voltage - Supply	2V ~ 3.6V	Current - Receiving	12.7mA ~ 14.8mA
Current - Transmitting	14mA ~ 22.5mA	Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount	Base Product Number	JN517