This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM158J +BOM

Dual 40nA 1MHz CERDIP-8 Operational Amplifier ROHS

Manufacturer:

Texas Instruments
Mfr.Part #:

LM158J
Datasheet:

LM158J Datasheet (PDF)
Number Of Channels:

2
Total Supply Voltage (+5 V = 5, ±5 V = 10) (max) (V):

32
Total Supply Voltage (+5 V = 5, ±5 V = 10) (min) (V):

3
Rail-to-rail:

In to V-
EDA/CAD Models:

Request Free CAD Models for LM158J

LM158J General Description

The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard 3.3-V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15-V power supplies.

The LM358 and LM2904 are available in a chip-sized package (8-bump DSBGA) using TIs DSBGA package technology.

Key Features

Available in 8-bump DSBGA chip-sized package (see AN-1112, SNVA009)
Internally frequency compensated for unity gain
Large DC voltage gain: 100 dB
Wide bandwidth (unity gain): 1 MHz (temperature compensated)
Wide power supply range:
- Single supply: 3 V to 32 V
- Or dual supplies: ±1.5 V to ±16 V
Very low supply current drain (500 µA) essentially independent of supply voltage
Low input offset voltage: 2 mV
Input common-mode voltage range includes ground
Differential input voltage range equal to the power supply voltage
Large output voltage swing
Unique characteristics:
- In the Linear Mode the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage
- The unity gain cross frequency is temperature compensated
- The input bias current is also temperature compensated
Advantages:
- Two internally compensated op amps
- Eliminates need for dual supplies
- Allows direct sensing near GND and V_OUT also goes to GND
- Compatible with all forms of logic
- Power drain suitable for battery operation

Specifications

Number of channels	2	Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	32
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	3	Rail-to-rail	In to V-
GBW (typ) (MHz)	0.7	Slew rate (typ) (V/µs)	0.5
Vos (offset voltage at 25°C) (max) (mV)	2	Iq per channel (typ) (mA)	0.35
Vn at 1 kHz (typ) (nV√Hz)	40	Rating	Military
Operating temperature range (°C)	-55 to 125	Offset drift (typ) (µV/°C)	7
Input bias current (max) (pA)	50000	CMRR (typ) (dB)	85
Iout (typ) (A)	0.03	Architecture	Bipolar
Input common mode headroom (to negative supply) (typ) (V)	0	Input common mode headroom (to positive supply) (typ) (V)	-1.5
Output swing headroom (to negative supply) (typ) (V)	0.005	Output swing headroom (to positive supply) (typ) (V)	-2