This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

M38510/30905BEA +BOM

Data Selectors/Multiplexers With 3-State Outputs

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

M38510/30905BEA
Datasheet:

M38510/30905BEA Datasheet (PDF)
Technology Family:

LS
Function:

Digital Multiplexer
Configuration:

8:1
Number Of Channels:

1
EDA/CAD Models:

Request Free CAD Models for M38510/30905BEA

M38510/30905BEA General Description

These monolithic data selectors/multiplexers contain full on-chip binary decoding to select one-of-eight data sources and feature a strobe-controlled three-state output. The strobe must be at a low logic level to enable these devices. The three-state outputs permit a number of outputs to be connected to a common bus. When the strobe input is high, both outputs are in a high-impedance state in which both the upper and lower transistors of each totem-pole output are off, and the output neither drives nor loads the bus significantly. When the strobe is low, the outputs are activated and operate as standard TTL totem-pole outputs.

To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the output control circuitry is designed so that the average output disable time is shorter than the average output enable time. The SN54251 and SN74251 have output clamp diodes to attenuate reflections on the bus line.

Key Features

Three-State Versions of '151, 'LS151, 'S151
Three State Outputs Interface Directly with System Bus
Perform Parallel-to-Serial Conversion
Permit Multiplexing from N-Lines to One Line
Complementary Outputs Provide True and Inverted Data
Fully Compatible with Most TTL Circuits

Specifications

Technology family	LS	Function	Digital Multiplexer
Configuration	8:1	Number of channels	1
Operating temperature range (°C)	-55 to 125	Rating	Military
feature-logic-family	LS	feature-logic-function	Multiplexer
feature-configuration	1 x 8:1	feature-number-of-elements-per-chip	1
feature-number-of-inputs-per-chip	8	feature-number-of-outputs-per-chip	1
feature-polarity	Inverting/Non-Inverting	feature-process-technology	Bipolar
feature-output-type	3-State	feature-maximum-low-level-output-current-ma	4
feature-maximum-high-level-output-current-ma	-1	feature-minimum-operating-supply-voltage-v	4.5
feature-maximum-operating-supply-voltage-v	5.5	feature-tolerant-i-os-v
feature-maximum-power-dissipation-mw	35(Typ)	feature-packaging	Tube
feature-rad-hard	No	feature-pin-count	16
feature-cecc-qualified	No	feature-esd-protection
feature-escc-qualified		feature-military
feature-aec-qualified	No	feature-aec-qualified-number
feature-eccn-code	EAR99	feature-svhc	Yes
feature-svhc-exceeds-threshold	No