Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Maximize signal flexibility with this 2x2 dual crosspoint switch offering both analog and digital connectivity options
BGAManufacturer:
Mfr.Part #:
MAX9393ETJ-T
Datasheet:
Series:
MAX9393
Product:
Analog Crosspoint Switches
Configuration:
2 x 2
Input Type:
CML, LVCMOS, LVDS, LVPECL, LVTTL
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on MAX9393ETJ-T. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The MAX9392/MAX9393 dual 2 x 2 crosspoint switches perform high-speed, low-power, and low-noise signal distribution. The MAX9392/MAX9393 multiplex one of two differential input pairs to either or both low-voltage differential signaling (LVDS) outputs for each channel. Independent enable inputs turn on or turn off each differential output pair. Four LVCMOS/LVTTL logic inputs (two per channel) control the internal connections between inputs and outputs. This flexibility allows for the following configurations: 2 x 2 crosspoint switch, 2:1 mux, 1:2 splitter, or dual repeater. This makes the MAX9392/MAX9393 ideal for protection switching in fault-tolerant systems, loopback switching for diagnostics, fanout buffering for clock/data distribution, and signal regeneration. Fail-safe circuitry forces the outputs to a differential low condition for undriven inputs or when the common-mode voltage exceeds the specified range. The MAX9392 provides high-level input fail-safe detection for LVDS, HSTL, and other GND-referenced differential inputs. The MAX9393 provides low-level input fail-safe detection for LVPECL, CML, and other VCC-referenced differential inputs. Ultra-low 98ps(P-P) (max) pseudorandom bit sequence (PRBS) jitter ensures reliable communications in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and-data recovery, or serializers and deserializers. The high-speed switching performance guarantees 1.5GHz operation and less than 67ps (max) skew between channels. LVDS inputs and outputs are compatible with the TIA/EIA-644 LVDS standard. The LVDS outputs drive 100Ω loads. The MAX9392/MAX9393 are offered in a 32-pin TQFP package and operate over the extended temperature range (-40°C to +85°C). Also see the MAX9390/MAX9391 for the crossflow version.
Product Category: | Analog & Digital Crosspoint ICs | Series: | MAX9393 |
Product: | Analog Crosspoint Switches | Configuration: | 2 x 2 |
Input Type: | CML, LVCMOS, LVDS, LVPECL, LVTTL | Output Type: | LVDS |
Operating Supply Voltage: | 3.3 V | Packaging: | MouseReel |
Height: | 0.73 mm | Length: | 5 mm |
Product Type: | Analog & Digital Crosspoint ICs | Factory Pack Quantity: | 2500 |
Subcategory: | Communication & Networking ICs | Supply Type: | Single |
Supply Voltage - Max: | 3.6 V | Supply Voltage - Min: | 3 V |
Width: | 5 mm | Part # Aliases: | MAX9393 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
OP07AZ
Analog Devices Inc.
Operational Amplifiers - Op Amps
MAX3222EUP
MAXIM
Line Transceiver, 1 Func, 2 Driver, 2 Rcvr, CMOS, PDSO20, 4.40 MM, 0.65 MM PITCH, MO-153AD, TSSOP-20
MAX4107ESA+
MAXIM
High-performance amplifiers
MAX497CSE+
Maxim Integrated
MAX497CSE from Maxim Integrated Products: A versatile Op Amp
MAX9675ECQ+
Maxim Integrated
Analog Video 110MHz 16 x 16 100-Pin TQFP