Payment Method
TPS54618CQRTERQ1 +BOM
Step-down 6A converter
WQFN16-
Manufacturer:
-
Mfr.Part #:
TPS54618CQRTERQ1
-
Datasheet:
-
Vin (min) (V):
2.95
-
Vin (max) (V):
6
-
Vout (min) (V):
0.8
-
Vout (max) (V):
4.5
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on TPS54618CQRTERQ1. Guaranteed response within 12hr.
Availability: 7572 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPS54618CQRTERQ1 General Description
The TPS54618C-Q1 device is a full-featured 6-V, 6-A, synchronous step-down current-mode converter with two integrated MOSFETs.
The TPS54618C-Q1 enables small designs by integrating the MOSFETs, implementing current-mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small, 3-mm × 3-mm, thermally-enhanced WQFN package.
The TPS54618C-Q1 provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.
Efficiency is maximized through the integrated 12-mΩ MOSFETs and 515-µA typical supply current. Using the enable pin, shutdown supply current is reduced to 5.5-µA by entering a shutdown mode.
Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output-voltage start-up ramp is controlled by the slow-start pin. An open-drain power-good signal indicates the output is within 93% to 107% of its nominal voltage.
Frequency foldback and thermal shutdown protect the device during an overcurrent condition.
TPS54618CQRTERQ1 Pinout
Key Features
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: -40°C to +125°C, TA
- Functional Safety-Capable
- Documentation available to aid functional safety system design
- Two 12-mΩ (typical) MOSFETs for high efficiency at 6-A loads
- 300-kHz to 2-MHz switching frequency
- 0.8-V ±1% Voltage reference over temperature (–40°C to +150°C)
- Synchronizes to external clock
- Adjustable slow start and sequencing
- UV and OV power-good output
- New product available: TPS62816-Q1, 6-V step-down converter in 2-mm x 3-mm QFN package with wettable flanks
- Thermally-enhanced 3-mm × 3-mm, 16-pin WQFN package
Application
- Automotive head unit
- Automotive instrument cluster
- Automotive ADAS camera
Specifications
Vin (min) (V) | 2.95 | Vin (max) (V) | 6 |
Vout (min) (V) | 0.8 | Vout (max) (V) | 4.5 |
Iout (max) (A) | 6 | Iq (typ) (mA) | 0.515 |
Switching frequency (min) (kHz) | 200 | Switching frequency (max) (kHz) | 2000 |
Features | Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable | Operating temperature range (°C) | -40 to 125 |
Rating | Automotive | TI functional safety category | Functional Safety-Capable |
Regulated outputs (#) | 1 | Control mode | current mode |
Duty cycle (max) (%) | 98 | Type | Converter |
Pin Count | 17 | Released Date | Apr 14, 2021 |
Last Modified Date | Mar 7, 2023 4:10 PM UTC |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,572
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All modules working thank you very much