This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS562207SDRLR +BOM

Buck Switching Regulator IC Positive Adjustable 0.804V 1 Output 2A SOT-563, SOT-666

Manufacturer:

TI
Mfr.Part #:

TPS562207SDRLR
Datasheet:

TPS562207SDRLR Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99

TPS562207SDRLR General Description

The TPS562207S is a simple, easy-to-use, 2-A synchronous buck converter in a SOT563 package.

The device is optimized to operate with minimum external components and also optimized to achieve low standby current.

This switch mode power supply (SMPS) device employs D-CAP2 mode control providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.

The TPS562207S operates in Forced Continuous Conduction Mode (FCCM), which maintains fixed switching frequency and output voltage ripple is very small. The TPS562207S is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.

Key Features

2-A converter with integrated 140-mΩ and 84-mΩ FETs
D-CAP2™ mode control with fast transient response
Input voltage range: 4.3 V to 17 V
Output voltage range: 0.804 V to 7 V
Forced continuous conduction mode
580-kHz switching frequency
Low shutdown current of less than 3 µA
1.5% feedback voltage accuracy (25°C)
Supports pre-bias start-up
Cycle-by-cycle overcurrent limit
Hiccup-mode overcurrent protection
Non-latch UVP and TSD protections
Fixed soft start: 1.2 ms

Specifications

Source Content uid	TPS562207SDRLR	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.39.00.01
Date Of Intro	2020-10-30	Analog IC - Other Type	SWITCHING REGULATOR
Control Technique	PULSE WIDTH MODULATION	Input Voltage-Max	17 V
Input Voltage-Min	4.3 V	Input Voltage-Nom	12 V
JESD-30 Code	R-PDSO-F6	JESD-609 Code	e3
Length	1.6 mm	Moisture Sensitivity Level	1
Number of Functions	1	Number of Outputs	1
Number of Terminals	6	Operating Temperature-Max	125 °C
Operating Temperature-Min	-40 °C	Output Current-Max	2 A
Output Voltage-Max	7 V	Output Voltage-Min	0.806 V
Peak Reflow Temperature (Cel)	260	Seated Height-Max	0.6 mm
Supply Current-Max (Isup)	0.75 mA	Supply Voltage-Nom (Vsup)	12 V
Surface Mount	YES	Switcher Configuration	BUCK
Switching Frequency-Max	590 kHz	Terminal Finish	MATTE TIN
Terminal Form	FLAT	Terminal Pitch	0.5 mm
Terminal Position	DUAL	Width	1.2 mm