This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS63061DSCT +BOM

Buck-Boost Switching Regulator IC Positive Fixed 5V 1 Output 2A (Switch) 10-WFDFN Exposed Pad

Manufacturer:

TI
Mfr.Part #:

TPS63061DSCT
Datasheet:

TPS63061DSCT Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

10
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for TPS63061DSCT

TPS63061DSCT General Description

The TPS6306x devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2 A while using a dual-cell Li-Ion or Li-polymer battery, and discharge to 5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25 A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load disconnects from the battery.

The devices are available in a 3 mm × 3 mm, 10-pin, WSON (DSC) package.

Key Features

Semiconductor Device Physics
Control System Theory Fundamentals
Power Electronic Circuits Analysis

Specifications

Source Content uid	TPS63061DSCT	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	10
Reach Compliance Code	compliant	ECCN Code	EAR99
HTS Code	8542.39.00.01	Analog IC - Other Type	SWITCHING REGULATOR
Control Mode	CURRENT-MODE	Control Technique	PULSE WIDTH MODULATION
JESD-30 Code	S-PDSO-N10	Moisture Sensitivity Level	2
Number of Functions	1	Number of Terminals	10
Peak Reflow Temperature (Cel)	260	Surface Mount	YES
Switcher Configuration	BUCK-BOOST	Temperature Grade	INDUSTRIAL
Terminal Finish	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	Terminal Form	NO LEAD
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED