Payment Method
TPS651851RSLR +BOM
Power Management IC 3V to 6V 48-Pin VQFN EP T/R
VQFN (RSL)-48-
Manufacturer:
-
Mfr.Part #:
TPS651851RSLR
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Active
-
Reach Compliance Code:
compliant
-
Date Of Intro:
2016-12-18
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on TPS651851RSLR. Guaranteed response within 12hr.
Availability: 6967 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPS651851RSLR General Description
The TPS65185x device is a single-chip power supply designed to for E Ink Vizplex displays used in portable e-reader applications, and the device supports panel sizes up to 9.7 inches and greater. Two high efficiency DC-DC boost converters generate ±16-V rails that are boosted to 22 V and –20 V by two change pumps to provide the gate driver supply for the Vizplex panel. Two tracking LDOs create the ±15-V source driver supplies that support up to 120/200 mA (TPS65185/TPS651851) of output current. All rails are adjustable through the I2C interface to accommodate specific panel requirements.
Accurate back-plane biasing is provided by a linear amplifier that can be adjusted from 0 V to –5.11 V with 9-bit control through the serial interface; it can source or sink current depending on panel condition. The TPS65185x supports automatic panel kickback voltage measurement, which eliminates the need for manual VCOM calibration in the production line. The measurement result can be stored in non-volatile memory to become the new VCOM power-up default value.
TPS65185 is available in two packages, a 48-pin 7-mm × 7-mm2 VQFN (RGZ) with 0.5-mm pitch, and a 48-pin 6-mm × 6-mm2 VQFN (RSL) with 0.4-mm pitch. The TPS651851 is available in a 48-pin 6-mm × 6-mm2 VQFN (RSL) with 0.4-mm pitch.
Key Features
- Single Chip Power-Management Solution for
E Ink? Vizplex? Electronic Paper (E-Paper) Displays - Generates Positive and Negative Gates, and Source Driver Voltages and Back-Plane Bias From a Single, Low-Voltage Input Supply
- Supports 9.7-Inch and Larger Panel Sizes
- 3-V to 6-V Input Voltage Range
- Boost Converter for Positive Rail Base
- Inverting Buck-Boost Converter for Negative Rail Base
- Two Adjustable LDOs for Source Driver Supply
- TPS65185 LDO1: 15 V, 120 mA (VPOS)
- TPS65185 LDO2: –15 V, 120 mA (VNEG)
- TPS651851 LDO1: 15 V, 200 mA at
VIN ≥ 3.6 V (VPOS) - TPS651851 LDO2: –15 V, 200 mA at
VIN ≥ 3.6 V (VNEG)
- Accurate Output Voltage Tracking
- VPOS – VNEG = ±50 mV
- Two Charge Pumps for Gate Driver Supply
- CP1: 22 V, 15 mA (VDDH)
- CP2: –20 V, 15 mA, (VEE)
- Adjustable VCOM Driver for Accurate Panel-Backplane Biasing
- 0 V to –5.11 V
- ± 1.5% accuracy (±10 mV)
- 9-Bit Control (10-mV Nominal Step Size)
- Active Discharge on All Rails
- Integrated 10-Ω, 3.3-V Power Switch for Disabling System Power Rail to E-Ink Panel
Specifications
Source Content uid | TPS651851RSLR | Pbfree Code | Yes |
Part Life Cycle Code | Active | Reach Compliance Code | compliant |
Date Of Intro | 2016-12-18 | Adjustable Threshold | YES |
Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT | Input Voltage-Max | 5.9 V |
Input Voltage-Min | 3 V | JESD-30 Code | S-PQCC-N48 |
JESD-609 Code | e4 | Length | 6 mm |
Moisture Sensitivity Level | 3 | Number of Channels | 4 |
Number of Functions | 1 | Number of Outputs | 4 |
Number of Terminals | 48 | Operating Temperature-Max | 85 °C |
Operating Temperature-Min | -40 °C | Peak Reflow Temperature (Cel) | 260 |
Seated Height-Max | 1 mm | Supply Voltage-Max (Vsup) | 5.9 V |
Supply Voltage-Min (Vsup) | 3 V | Supply Voltage-Nom (Vsup) | 3.7 V |
Surface Mount | YES | Switching Frequency-Max | 1000 kHz |
Temperature Grade | INDUSTRIAL | Terminal Finish | NICKEL PALLADIUM GOLD |
Terminal Form | NO LEAD | Terminal Pitch | 0.4 mm |
Terminal Position | QUAD | Threshold Voltage-Nom | +2.9V |
Time@Peak Reflow Temperature-Max (s) | 30 | Width | 6 mm |
Regulated outputs (#) | 4 | Vin (min) (V) | 3 |
Vin (max) (V) | 5.9 | Iout (max) (A) | 0 |
Configurability | Factory programmable | Rating | Catalog |
Step-down DC/DC converter | 0 | Step-up DC/DC converter | 2 |
LDO | 2 | Iq (typ) (mA) | 5.5 |
Switching frequency (max) (kHz) | 1000 | Features | Enable, Enable pin, I2C control, Power sequencing, Soft-start adjustable, Thermal shutdown |
Operating temperature range (°C) | -10 to 85, -40 to 85 | Processor name | Vizplex |
Processor supplier | E Ink | Shutdown current (ISD) (typ) (µA) | 3.5 |
Switching frequency (typ) (kHz) | 1000 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,967
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.