This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TS5N214DBQR +BOM

Wide operating voltage range ensures flexibility in various applications

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

TS5N214DBQR
Datasheet:

TS5N214DBQR Datasheet (PDF)
Type:

Multiplexer/Demultiplexer
Circuit:

2 x 1:4
Independent Circuits:

1
Voltage Supply Source:

Single Supply
EDA/CAD Models:

Request Free CAD Models for TS5N214DBQR

TS5N214DBQR General Description

Multiplexer/Demultiplexer 2 x 1:4 16-SSOP

Key Features

Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range (ron = 3Typ)
0- to 10-V Switching on Data I/O Ports
Bidirectional Data Flow With Near-Zero Propagation Delay
Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 20 pF Max, B Port)
VCC Operating Range From 4.75 V to 5.25 V
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model(A114-B, Class II)
- 1000-V Charged-Device Model (C101)
Supports Both Digital and Analog Applications: PCI Interface, Differential Signal Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating

Description

The TS5N214 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distorion on the data bus. Specifically designed to support high-bandwidth applications, the TS5N214 provides an optimized interface solution ideally suited for broadband communications, networking, and data-intensive computing systems.

The TS5N214 is a 2-bit 1-of-4 multiplexer/demultiplexer with separate output-enable (1OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Specifications

Category	Integrated Circuits (ICs)LogicSignal Switches, Multiplexers, Decoders	Series	-
Type	Multiplexer/Demultiplexer	Circuit	2 x 1:4
Independent Circuits	1	Current - Output High, Low	-
Voltage Supply Source	Single Supply	Voltage - Supply	4.75V ~ 5.25V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount
Base Product Number	TS5N214