Payment Method
W25Q128BVEIG +BOM
28M X 1, WSON-8 8MMX6MM
8-WDFNExposedPad-
Manufacturer:
Winbond Electronics
-
Mfr.Part #:
W25Q128BVEIG
-
Datasheet:
-
Series:
SpiFlash®
-
Programmabe:
Not Verified
-
Memory Type:
Non-Volatile
-
Memory Format:
FLASH
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on W25Q128BVEIG. Guaranteed response within 12hr.
Availability: 7291 PCS
Please fill in the short form below and we will provide you the quotation immediately.
W25Q128BVEIG General Description
In addition to its performance capabilities, the W25Q128BVEIG chip prioritizes data integrity and security with built-in Write Protection mechanisms to safeguard against accidental corruption. Its dual/quad SPI mode further enhances data transfer rates, making it an ideal choice for high-speed applications. The chip's low power consumption in standby mode ensures energy efficiency, while its wide operating temperature range of -40°C to 85°C makes it suitable for use in various environmental conditions
Key Features
- Family of SpiFlash Memories
- – W25Q128BV: 128M-bit/16M-byte
- – 256-byte per programmable page
- – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
- – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
- – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
- Highest Performance Serial Flash
- – 104/70MHz Dual Output/Quad SPI clocks
- – 208/280MHz equivalent Dual /Quad SPI
- – 35MB/S continuous data transfer rate
- – Up to 5X that of ordinary Serial Flash
- – More than 100,000 erase/program cycles(1)
- – More than 20-year data retention
- Efficient “Continuous Read Mode”
- – Low Instruction overhead
- – Continuous Read with 8/16/32/64-Byte Wrap
- – As few as 8 clocks to address memory
- – Allows true XIP (execute in place) operation
- – Outperforms X16 Parallel Flash
- Low Power, Wide Temperature Range
- – Single 2.7 to 3.6V supply
- – 4mA active current, <1µA Power-down current
- – -40°C to +85°C operating range
- Flexible Architecture with 4KB sectors
- – Uniform Sector/Block Erase (4K/32K/64K-Byte)
- – Program one to 256 bytes
- – Erase/Program Suspend & Resume
- Advanced Security Features
- – Software and Hardware Write-Protect
- – Top/Bottom, 4KB complement array protection
- – Lock-Down and OTP array protection
- – 64-Bit Unique Serial Number for each device
- – Discoverable Parameters (SFDP) Register
- – 3X256-Byte Security Registers with OTP locks
- – Volatile & Non-volatile Status Register Bits
- Space Efficient Packaging
- – 8-pad WSON 8x6-mm
- – 16-pin SOIC 300-mil
- – 24-ball TFBGA 8x6-mm
- – Contact Winbond for KGD and other options
Specifications
Series | SpiFlash® | Programmabe | Not Verified |
Memory Type | Non-Volatile | Memory Format | FLASH |
Technology | FLASH - NOR | Memory Size | 128Mbit |
Memory Organization | 16M x 8 | Memory Interface | SPI - Quad I/O |
Clock Frequency | 104 MHz | Write Cycle Time - Word, Page | 50µs, 3ms |
Voltage - Supply | 2.7V ~ 3.6V | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Base Product Number | W25Q128 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,291
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.