This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

W25Q256FVFIQ +BOM

W25Q256FVFIQ is a SOIC-16 NOR FLASH ROHS product

Manufacturer:

Winbond Electronics
Mfr.Part #:

W25Q256FVFIQ
Datasheet:

W25Q256FVFIQ Datasheet (PDF)
Series:

SpiFlash®
Programmabe:

Not Verified
Memory Type:

Non-Volatile
Memory Format:

FLASH
EDA/CAD Models:

Request Free CAD Models for W25Q256FVFIQ

W25Q256FVFIQ General Description

With a voltage range of 2.7V to 3.6V, the W25Q256FVFIQ is well-suited for low-power applications, offering flexibility and efficiency. Its erase and program capability is highly adaptable, with a sector erase time of just 100ms and a full chip erase time of 40s. Moreover, it boasts an impressive reliability rating, providing a typical endurance of 100,000 program/erase cycles per sector, ensuring long-lasting performance and durability

Key Features

New Family of SpiFlash Memories
– W25Q256FV: 256M-bit / 32M-byte
– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
– 3 or 4-Byte Addressing Mode
– Software & Hardware Reset
Highest Performance Serial Flash
– 104MHz Standard/Dual/Quad SPI clocks
– 208/416MHz equivalent Dual/Quad SPI
– 50MB/S continuous data transfer rate
– More than 100,000 erase/program cycles
– More than 20-year data retention
Efficient “Continuous Read”
– Continuous Read with 8/16/32/64-ByteWrap
– As few as 8 clocks to address memory
– Quad Peripheral Interface (QPI) reduces instruction overhead
– Allows true XIP (execute in place) operation
– Outperforms X16 Parallel Flash Low Power, Wide Temperature Range
– Single 2.7 to 3.6V supply
– 4mA active current, <1µA Power-down (typ.)
– -40°C to +85°C operating range
Flexible Architecture with 4KB sectors
– Uniform Sector/Block Erase (4K/32K/64K-Byte)
– Program 1 to 256 byte per programmable page
– Erase/Program Suspend & Resume
Advanced Security Features
– Software and Hardware Write-Protect
– Power Supply Lock-Down and OTP protection
– Top/Bottom, Complement array protection
– Individual Block/Sector array protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Register
– 3X256-Bytes Security Registers with OTP locks
– Volatile & Non-volatile Status Register Bits
Space Efficient Packaging
– 8-pad WSON 8x6-mm
– 16-pin SOIC 300-mil (additional /RESET pin)
– 24-ball TFBGA 8x6-mm
– Contact Winbond for KGD and other options

Specifications

Series	SpiFlash®	Programmabe	Not Verified
Memory Type	Non-Volatile	Memory Format	FLASH
Technology	FLASH - NOR	Memory Size	256Mbit
Memory Organization	32M x 8	Memory Interface	SPI - Quad I/O, QPI
Clock Frequency	104 MHz	Write Cycle Time - Word, Page	50µs, 3ms
Voltage - Supply	2.7V ~ 3.6V	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	W25Q256