This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

1.5KE9.1A +BOM

13.4V Clamp 117A Ipp Tvs Diode Through Hole DO-201

Manufacturer:

Diotec Semiconductor
Mfr.Part #:

1.5KE9.1A
Datasheet:

1.5KE9.1A Datasheet (PDF)
Polarity:

Unidirectional
Working Voltage:

7.7 V
Termination Style:

Axial
Clamping Voltage:

13.4 V
EDA/CAD Models:

Request Free CAD Models for 1.5KE9.1A

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

1.5KE9.1A General Description

The 1.5KE9.1A is a part of the 1.5KE Series, which is meticulously crafted to provide safeguarding to delicate electronic devices against voltage transients caused by lightning and other transient voltage occurrences. This series is an essential component for ensuring the protection and longevity of sensitive electronic equipment

Key Features

1500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Glass passivated chip junction in DO-201 Package
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Low incremental surge resistance
Typical IR less than 1μA when VBR min>12V
High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
VBR @ TJ = VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
Plastic package is flammability rated V-0 per Underwriters Laboratories
Matte tin lead–free plated
Halogen free and RoHS compliant
Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)

Application

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.

Specifications

Product Category	TVS Diodes / ESD Suppressors	Polarity	Unidirectional
Working Voltage	7.7 V	Termination Style	Axial
Clamping Voltage	13.4 V	Breakdown Voltage	8.65 V
Ipp - Peak Pulse Current	117 A	Pppm - Peak Pulse Power Dissipation	1.5 kW
Product Type	TVS Diodes	Minimum Operating Temperature	- 50 C
Maximum Operating Temperature	+ 175 C	Series	1.5KE
Pd - Power Dissipation	6.5 W	Factory Pack Quantity	1250
Subcategory	TVS Diodes / ESD Suppression Diodes	Tradename	1.5KE9.1A
Vf - Forward Voltage	3.5 V	Unit Weight	0.040706 oz