This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PM25CL1A120 +BOM

High-power AC Motor Controller for up to 50 amps

Power Driver Module IGBT 3 Phase 1.2 kV 25 A Power Module

Single Power Supply Operation
- Low voltage range: 2.7 V - 3.6 V
Memory Organization
- Pm25LV010: 128K x 8 (1 Mbit)
- Pm25LV020: 256K x 8 (2 Mbit)
- Pm25LV040: 512K x 8 (4 Mbit)
Cost Effective Sector/Block Architecture
- 1Mb : Uniform 4Kbyte sectors / Four uniform 32Kbyte blocks
- 2Mb : Uniform 4Kbyte sectors / Four uniform 64Kbyte blocks
- 4Mb : Uniform 4Kbyte sectors / Eight uniform 64Kbyte blocks
- Bottom sector is configurable as one 4Kbyte sector or four 1Kbyte sectors
Serial Peripheral Interface (SPI) Compatible
- Supports SPI Modes 0 (0,0) and 3 (1,1)
- Maximum 33 MHz clock rate for fast read
- Maximum 33 MHz clock rate for read
Page Program (up to 256 Bytes) Operation
- Typical 2 ms per page program
Sector, Block or Chip Erase Operation
- Typical 40 ms sector, block or chip erase
Software Write Protection
- The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only
Hardware Write Protection
- Protect and unprotect the device from write operation by Write Protect (WP#) Pin
Low Power Consumption
- Typical 10 mA active read current
- Typical 15 mA program/erase current
High Product Endurance
- Guarantee 100,000 program/erase cycles per single sector
- Minimum 20 years data retention
Industrial Standard Pin-out and Package
- 8-pin 150mil SOIC
- 8-pin 208mil SOIC for Pm25LV040
- 8-contact WSON
- Optional lead-free (Pb-free) package