Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
A 12-pin PowerSSO EP device, designed as a current limiting switch with one input and one output, compatible with voltages ranging from -0
12-LSOPManufacturer:
Mfr.Part #:
IPS161HFTR
Datasheet:
Switch Type:
General Purpose
Number Of Outputs:
1
Ratio - InputOutput:
1:1
Output Configuration:
High Side
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on IPS161HFTR. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
Built-in protections including overload and thermal shutdown safeguards ensure the IC, application, and load are protected from electrical and thermal stress. Additionally, a low-dissipative short-circuit protection feature limits power dissipation in the event of a shorted output, preventing device overheating. The cut-off delay time can be customized by adding an external capacitor or disabled using a resistor on pin 4 (CoD). Furthermore, the DIAG common diagnostic open drain pin provides valuable information about the status of the load, including open load, cut-off due to overload, and thermal shutdown detection
Category | Integrated Circuits (ICs)Power Management (PMIC)Power Distribution Switches, Load Drivers | Series | - |
Switch Type | General Purpose | Number of Outputs | 1 |
Ratio - Input:Output | 1:1 | Output Configuration | High Side |
Output Type | P-Channel | Interface | - |
Voltage - Load | 8V ~ 60V | Voltage - Supply (Vcc/Vdd) | Not Required |
Current - Output (Max) | 600mA | Rds On (Typ) | 60mOhm |
Input Type | Non-Inverting | Features | - |
Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature | Operating Temperature | -40°C ~ 150°C (TJ) |
Mounting Type | Surface Mount | Base Product Number | IPS161 |
feature-type | feature-maximum-power-dissipation-mw | ||
feature-packaging | Tape and Reel | feature-rad-hard | |
feature-pin-count | 12 | feature-cecc-qualified | |
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | feature-svhc-exceeds-threshold | No |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $2.509 | $2.51 |
10+ | $2.178 | $21.78 |
30+ | $1.971 | $59.13 |
100+ | $1.758 | $175.80 |
500+ | $1.662 | $831.00 |
1000+ | $1.623 | $1,623.00 |
The prices below are for reference only.